ARE 5.0 Project Development & Documentation Exam Prep

Previous Chapter:
Objective 1.2: Determine the Size of Mechanical, Electrical, Plumbing Systems and Components to Meet Project Goals

Currently Viewing:
Objective 1.3: Determine the Size of Structural Systems to Meet Project Goals

Course Videos
Practical Applications - Upgrade to Pro

Up Next:
Objective 1.4: Integrate Specialty Systems Such as Acoustics, Lighting, Fire Suppression, Conveying, Security, and Communications to Meet Project Goals

You have reached one of our paid video tutorials for the course:

ARE 5.0 Project Development & Documentation Exam Prep

You can either log in to view it or learn more about our memberships.

Typical Steel Design Issues - Part 1

16m 19s

In this ARE 5.0 NCARB-approved Project Development and Documentation Exam Prep course you will learn about the topics covered in the ARE 5.0 PDD exam division. A complete and comprehensive curriculum, this course will touch on each of the NCARB objectives for the ARE 5.0 Project Development and Documentation Exam.

Instructor Mike Newman will discuss issues related to the development of design concepts, the evaluation of materials and technologies, selection of appropriate construction techniques, and appropriate construction documentation.

When you are done with this course, you will have a thorough understanding of the content covered in the ARE 5.0 Project Development and Documentation Exam including integration of civil, structural, mechanical, electrical, plumbing, and specialty systems into overall project design and documentation.

Transcript summarylog in to access this content in full.

They'd line it up well enough, they'd get it leveled out, they'd get it all worked out so it's kind of holding itself up and kinda being maneuvered, and then once they have that leveled and in place, they'd put a couple more bolts in that are gonna hold it tight in that spot and then in this moment connection example, they're then gonna hold it tight enough that they can start to do all the welding, add some more bolts to hold it while it's being welded, but essentially you are working your way to getting it to be solid and then welding it in place. In the pinned connection example we'll look at, you would probably just keep tightening it back and forth, back and forth, so you're making sure that's it getting level and you're tightening it up, but it always still has a little bit of ability to move. Tiny, but a little bit of ability to move until you finally get those last little bit of torque on those bolts to hold it really steady in place.

Log in to access files

From the course:
ARE 5.0 Project Development & Documentation Exam Prep

Duration: 36h 46m

Author: Mike Newman